Loading... Please wait...

Add to Wish List

Click the button below to add the 5.5" Lift Sys. - 2015-17 Chevy Colorado/GMC Canyon to your wish list.

5.5" Lift Sys. - 2015-17 Chevy Colorado/GMC Canyon

  • Image 1
210.00 LBS
Calculated at checkout

Product Description

Zone Offroad 2015-17 Chevy Colorado/GMC Canyon 5.5" Lift. 

This new suspension system for the redesigned Colorado has passed the FMVSS126 test for stability control compliance.  To properly lift the new Colorado/Canyon suspension 5.5", we started with new ductile cast iron steering knuckles.  The new knuckles position the critical steering and control arm mounting location and work in harmony with the heavy-duty fabricated crossmembers.  Along with new crossmembers, the provided differential drop brackets lower and reposition the front differential for correct CV shaft angles and still allow for use of the factory front driveshaft. 

Speaking of the front driveshaft, a spacer is included to adjust the length and retain optimum CV joint position.  A full width differential skid plate protects the relocated differential from the underside and ties the front and rear crossmembers together.  Moving up, the factory struts are retained and relocated with top spacers to gain the full 5.5" of lift.  The top spacers do not require any strut disassembly and properly angle and position the struts to eliminate binding thru wheel travel.  Extended sway bar links, bump stop extensions and brake line relocation are also included to make this a complete kit. 

In the rear, a new block and U-bolt kit provided 4" of lift to level out the rear with the front.  Rear Zone Hydro or Nitro shock options are available.

FMVSS No.126 compliant

The NHTSA's Federal Motor Vehicle Safety Standard (FMVSS) No.126 requires all new passenger vehicles to include Electronic Stability Control (ESC) systems that meet certain standards that can be tested through a comprehensive series of evasive maneuvers. Aftermarket products must meet these standards as well.

Zone Offroad Products is leading the industry by independently testing all suspension kits to verify the kits are fully compliant with the stability control system requirements set by Federal Motor Vehicle Safety Standard (FMVSS) No. 126.

Important Notes!

  • Inner fender trimming
  • Minor welding required for steering stops when combined with certain tire/wheel combinations - see installation instructions
  • The factory Electric Power Assisted Steering (EPAS) is sensitive to out-of-round, out-of-balance, overly aggressive tires.  Depending on the situation, some oscillating feedback in the steering wheel maybe experienced

This product fits the following applications:

  • 15 Chevy Colorado 4WD 5.5"
  • 15 GMC Canyon 4WD 5.5"
  • 16/17 GAS - Chevy Colorado 4WD 5.5"
  • 16/17 GAS - GMC Canyon 4WD 5.5"

Quick Specs

  • Front Lift Height: 5.5″
  • Front Lift Method: Spacer
  • Rear Lift Height: 4″
  • Rear Lift Method: Block Kit
  • Install Time Hrs: 8
  • Difficulty Level 1-5: 4
  • Wheel Size: 17x8
  • Back Spacing: 4.5″
  • Max Tire Size: 295/70R17
  • Wheel Size: 20x9
  • Back Spacing: 5.25″
  • Max Tire Size: 305/55R20


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!