Builders' Parts
Transfer Case Drops
Does your Jeep have a little drive line vibration? These transfer case drop kits might just be the answer.
|
ZONJ5004 | 87-02 Wrangler 3/4"
|
$ 47.19 KIT |
|
|
ZONJ5003 | 87-95 YJ 1-5/8"
|
$ 47.19 KIT |
|
|
ZONJ5008 | 97-02 TJ 1-5/8"
|
$ 58.44 KIT |
|
|
ZONJ5010 | 03-06 TJ 3/4"
|
$ 47.19 KIT |
|
|
ZONJ5011 | 03-06 TJ 1-5/8"
|
$ 51.69 KIT |
|
|
ZONJ5005 | 93-98 3/4"
|
$ 30.94 KIT |
Bar Pin Eliminator
Although designed for the rear of the XJ and TJ, this bar pin eliminator could be used for tons of custom shock mount applications.
Features
|
|
ZONJ5022 | Bar Pin Eliminator | $ 36.33 pair |
Weld on Dana 30 Sway Bar Mounts
If you purchased or built a long arm kit for a TJ or XJ and it didn't come with new sway bar mounts for the axle, then this is the item for you. This new weld on axle sway bar mount moves the OE sway bar mounting location up 2" from the axle to ensure the steering won't hit the sway bar mount. In most long arm kits on the market you will find that the inner tie rod end will hit the passenger side OE sway bar mount at full droop when turning. There is nothing worse that loosing turning ability when you are dangling from a rock wall.
Features :
|
|
ZONJ5203 | Weld on Sway Bar Mount | $ 40.77 each |
Rear Weld-on High Clearance Shock Mount
Tired of your rear factory shock mounts dragging the rocks? These new lower shock mounts were designed to raise the shock mount a full 3" on an XJ. The new lower mount is relocated even with the bottom of the axle tube, thus drastically increasing ground clearance. This weld on bracket is made from 3/16" steel and includes a new shock stud that will mate with any standard 5/8" ID shock bushing. Although designed for the XJ, this weld on shock mount can be used for any custom application with a tube diameter ranging from 2-1/2" to 3-1/2".
Features :
|
|
ZONJ5859 | Weld on Shock Mounts | $ 37.11 each |
Stem Eliminator
The shock stem eliminators not only work great for shock conversion, but can also be used for custom shock and sway bar link mount applications as well. These eliminators are designed to work with XJ, ZJ, TJ, YJ and WJ Jeep models to convert the front upper shock mount into a stronger, more common double shear mount. The brackets are made from 3/16" steel and have a 3/4" mount studs. 1/2" shock mount hardware is included.
Features :
|
|
ZONJ5015 | Stem Eliminator | $ 30.32 pair |
Lift Blocks
Zone blocks are cast in the USA and CNC machined for proper pin placement.
Features :
|
|
ZONU3020 | 2" Tapered Lift Blocks | $ 33.74 Pair |
|
|
ZONU3030 | 3" Tapered Lift Blocks | $ 39.36 Pair |
|
|
ZONU3040 | 4" Tapered Lift Blocks | $ 44.99 Pair |
|
|
ZONU3050 | 5" Tapered Lift Blocks | $ 56.24 Pair |
|
|
ZONU3051 | 5" Flat Lift Blocks | $ 56.24 Pair |
|
|
ZONU3022 | 2" LIFT BLOCK - 3/4" PIN | $ 33.74 PAIR |
|
|
ZONU3032 | 3" LIFT BLOCK - 3/4" PIN | $ 39.37 PAIR |
|
|
ZONU3042 | 4" LIFT BLOCK - 3/4" PIN | $ 44.99 PAIR |
|
|
ZONU3052 | 5" LIFT BLOCK - 3/4" PIN | $ 56.24 PAIR |
Front Coil Spring Retainers
The new heavy duty coil spring retainers are direct replacements for the factory TJ, XJ, and ZJ models. Instructions are included for use on a JK. Although these retainers were designed for Jeeps, they could be used on many applications. The use of heavy duty retainers ensures that your coil will stay in place when setting up your Jeep for extreme amounts of suspension travel.
|
|
ZONJ5002 | Coil Spring Retainer
|
$ 11.25 each |
Bulk Body Lift Blocks
|
|
ZON2296 | BULK 2" tall x 2" wide-Body Lift Blocks
|
$ 2.81 each |
|
|
ZON2396 | BULK 3" tall x 2" wide-Body Lift Block
|
$ 3.38 each |
|
|
ZON3296 | BULK 2" tall x 3" wide-Body Lift Blocks
|
$ 3.38 each |
|
|
ZON3396 | BULK 3" tall x 3" wide-Body Lift Blocks
|
$ 4.22 each |
Individual U-Bolts with High Nuts & Washers
All our u-bolts come with high nuts and heavy duty washers. The u-bolts are also zinc plated to protect them against the elements. The u-bolts are sold individually so you can order any quantity for any project you are working on. Be sure to measure your existing u-bolts before ordering. The picture above will assist you in how to measure them. The item descriptions below are listed as diameter x inside dimension x length.
Features :High Nuts Included
SAE Thru Hardened Washers Included
Zinc Plated for Rust Prevention
Features :
|
|
ZONU4001 - | 1/2 X 2-1/2 X 6-3/4 ROUND UBOLT | $ 7.93 |
|
|
ZONU4004 - | 1/2 X 2-3/4 X 5-1/2 ROUND UBOLT | $ 7.93 |
|
|
ZONU4005 - | 1/2 X 2-3/4 X 6-1/2 ROUND UBOLT | $ 7.93 |
|
|
ZONU4007 - | 1/2 X 2-3/4 X 8-1/2 ROUND UBOLT | $ 7.93 |
|
|
ZONU4009 - | 1/2 X 2-3/4 X 11 ROUND UBOLT | $ 7.93 |
|
|
ZONU4011 - | 1/2 X 2-3/4 X 14 ROUND UBOLT | $ 7.93 |
|
|
ZONU4013 | 1/2 X 3 X 8 1/2 ROUND U-BOLT | $ 7.93 |
|
|
ZONU4022 - | 5/8 X 3 X 12 ROUND UBOLT | $ 10.41 |
|
|
ZONU4024 - | 5/8 X 3 X 14-1/2 ROUND UBOLT | $ 10.41 |
|
|
ZONU4066 | 9/16 X 3 7/8 X 16 1/2 ROUND U-BOLT | $ 9.28 |
|
|
ZONU4145 | 9/16 X 2 9/16 X 12 1/2 Square U-BOLT | $ 9.28 EACH |
|
|
ZONU4010 - | 1/2 X 2-3/4 X 12-1/2 ROUND UBOLT | $ 7.93 |
|
|
ZONU4012 - | 1/2 X 3 X 6-3/4 ROUND UBOLT | $ 7.93 |
|
|
ZONU4026 - | 5/8 X 3-1/2 X 14-1/2 ROUND UBOLT | $ 10.41 |
|
|
ZONU4015 - | 1/2 X 3 X 11-1/2 ROUND UBOLT | $ 7.93 |
|
|
ZONU4029 - | 5/8 X 3-1/4 X 10-1/2 ROUND UBOLT | $ 10.41 |
|
|
ZONU4016 - | 1/2 X 3-1/4 X 7 ROUND UBOLT | $ 7.93 |
|
|
ZONU4032 | 5/8 X 3-1/4 X 10-1/2 ROUND UBOLT | $ 10.41 |
|
|
ZONU4018 - | 5/8 X 2-3/4 X 8 ROUND UBOLT | $ 10.41 |
|
|
ZONU4033 - | 5/8 X 3-5/8 X 12 ROUND UBOLT | $ 10.41 |
|
|
ZONU4019 - | 5/8 X 2-9/16 X 12 SQUARE UBOLT | $ 10.41 |
|
|
ZONU4034 - | 5/8 X 3-5/8 X 15 ROUND UBOLT | $ 10.41 |
|
|
ZONU4020 - | 5/8 X 3 X 8 ROUND UBOLT | $ 10.41 |
|
|
ZONU4035 - | 5/8 X 3-5/8 X 18-1/2 ROUND UBOLT | $ 10.41 |
|
|
ZONU4021 - | 5/8 X 3 X 10 ROUND UBOLT | $ 10.41 |
|
|
ZONU4036 - | 9/16 X 2-1/2 X 8-3/4 SQUARE UBOLT | $ 9.28 |
|
|
ZONU4038 - | 9/16 X 2-1/2 X 14 SQUARE UBOLT | $ 9.28 |
|
|
ZONU4039 - | 9/16 X 2-1/2 X 7 SQUARE UBOLT | $ 9.28 |
|
|
ZONU4040 - | 9/16 X 2-1/2 X 7 ROUND UBOLT | $ 9.28 |
|
|
ZONU4041 - | 9/16 X 2-3/4 X 7 ROUND UBOLT | $ 9.28 |
|
|
ZONU4042 - | 9/16 X 2-9/16 X 15 SQUARE UBOLT | $ 9.28 |
|
|
ZONU4043 - | 9/16 X 3-1/8 X 10-1/2 SQUARE UBOLT | $ 9.28 |
|
|
ZONU4044 - | 9/16 X 3-1/8 X 11 RADIUS UBOLT | $ 9.28 |
|
|
ZONU4045 - | 9/16 X 2-9/16 X 11-3/8 SQUARE UBOLT | $ 9.28 |
|
|
ZONU4046 - | 9/16 X 3-1/8 X 9-1/2 RADIUS U-BOLT | $ 9.28 |
|
|
ZONU4047 - | 9/16 X 3 X 7-1/2 ROUND U-BOLT | $ 9.28 |
|
|
ZONU4048 - | 9/16 X 3 X9-1/2 ROUND U-BOLT | $ 9.28 |
|
|
ZONU4049 - | 9/16 X 3-1/8 X 15 SQUARE U-BOLT | $ 9.28 |
|
|
ZONU4050 - | 9/16 X 3 -1/8 X 18 SQUARE U-BOLT | $ 9.28 |
|
|
ZONU4051 - | 9/16 X 3-1/4 X 10 ROUND U-BOLT | $ 9.28 |
|
|
ZONU4052 - | 9/16 X 3-1/4 X 14 ROUND U-BOLT | $ 9.28 |
|
|
ZONU4053 - | 9/16 X 3-1/8 X 9 SQUARE U-BOLT | $ 9.28 |
|
|
ZONU4054 - | 9/16 X 3-1/2 X 9-1/2 ROUND U-BOLT | $ 9.28 |
|
|
ZONU4055 - | 9/16 X 3-3/4 X 9-5/8 ROUND U-BOLT | $ 9.28 |
|
|
ZONU4056 - | 9/16 X 3-5/16 X 14-3/4 ROUND U-BOLT | $ 9.28 |
|
|
ZONU4057 - | 9/16 X 3-5/16 X 8 ROUND U-BOLT | $ 9.28 |
|
|
ZONU4058 - | 9/16 X 3-5/16 X 9-3/4 ROUND U-BOLT | $ 9.28 |
|
|
ZONU4059 - | 9/16 X 3-1/4 X 12-1/2 ROUND U-BOLT | $ 9.28 |
|
|
ZONU4060 - | 9/16 X 3 X 11 ROUND U-BOLT | $ 9.28 |
|
|
ZONU4061 - | 9/16 X 3-1/4 X 10 SQUARE U-BOLT | $ 9.28 |
|
|
ZONU4062 - | 9/16 X 3-7/8 X 12-1/2 ROUND U-BOLT | $ 9.28 |
|
|
ZONU4063 - | 9/16 X 3-7/8 X 14-1/2 ROUND U-BOLT | $ 9.28 |
|
|
ZONU4064 - | 9/16 X 3-1/2 X 12-1/2 ROUND U-BOLT | $ 9.28 |
|
|
ZONU4065 - | 9/16 X 3-1/2 X 14-1/2 ROUND U-BOLT | $ 9.28 |
|
|
ZONU4067 - | 9/16 X 4-1/8 X 12-1/2 ROUND U-BOLT | $ 9.28 |
|
|
ZONU4068 - | 9/16 X 4-1/8 X 16-1/2 ROUND U-BOLT | $ 9.28 |
Zone Offroad Canada is an authorized dealer of Zone Offroad parts in Canada. We are here to provide Zone Offroad parts to Canadians. If you would like to save yourself the hassle of ordering Zone Offroad parts from the USA you will find our prices very competitive and shipping rates affordable.